FESTOOL CT 36L M CLASS AUTOCLEAN PLANEX DUST EXTRACTOR

The higher the material removal capacity of a sander, the more powerful the corresponding mobile dust extractor needs to be.

The powerful CLEANTEC CTM 36 AC PLANEX with a 36 l container volume is designed specifically for the extreme material removal capacity of the PLANEX long-reach sander. With tool holder, non-buckling hose and standard ComfortClean sealing slide for even more efficient filter cleaning.

With its large container geometry, the CTM 36 AC PLANEX provides maximum volume.

At the same time it is extremely mobile, thanks to swivelling castor wheels and large rear wheels.<

• The perfect mobile dust extractor for all PLANEX long-reach sanders
• AUTOCLEAN automatic main filter cleaning system for consistently high suction power
• Antistatic function prevents static developing during work
• Attachment of Systainers via SYS-Dock
• Hose garage and cable windup for greater tidiness and safety
• Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container
• container/filter bag capacity 36/34 l
• with AUTOCLEAN function
• approved for dust class M
• special extractor for all PLANEX long-reach sanders
• for mineral dust

MAIN APPLICATIONS

• For dust with limit values > 0.1 mg/m³
• Integral automatic electronic switch-on/shut-off for extraction from electric power tools
• Suitable for both wet and dry extraction
• Ideal for sanding filler compound with the PLANEX long-reach sander

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.

Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.

When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.

When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)

Videos