30MM X 0.8MM X 30M PUNCHED

$52.30 (inc GST)

Stock Low

Sale Unit: ROLLS OF 30M

Product Code: HOOPIRONP

Brand: Dunnings

HOOP IRON PUNCHED 30MM X 0.8MM X 30M

Various solutions for Type A and Type B bracing and general strapping requirements made from galvabond material

Applications:

Two individually cut pieces of Hoop Iron Bracing are required to brace a timber framed wall section. These pieces should overlap to form an ‘X’.

Secure first end of one piece of bracing into position using 30 x 2.8mm Dunnings’ nails.
Stretch the Hoop Iron Bracing over the entire panel to be braced, ensuring the brace is taut.
Secure the second end while maintaining tension on the brace.
Repeat this procedure for the second piece of Hoop Iron Bracing, ensuring an ‘X’ is formed.
Secure the Hoop Iron Tensioner in each length of Hoop Iron Bracing to remove any remaining slack.

Material Specification:

Thickness: 0.8mm

Material: G300 Z275